Hinged Fasteners With Pre-Mounted Staples
Plated steel or non-magnetic stainless
steel fasteners to meet the exacting standards of the Food Industry. The
smooth low profile of MINI-RECORD makes it quick and easy to install
full width joints in most light to medium duty conveyor belts. A
continuous bottom plate ensures good alignment of the joint and easy
introduction of the connecting pin. Non-magnetic stainless steel
staples.
MINI-RECORD
| TYPE | Belt Thickness Range | Maximum Working Tension | PIN |
Minimum Pulley Diameter |
||||
| INCH | mm | PIW | KN./m | INCH | mm | INCH | mm | |
| MR1 | 1/16 - 1/8 | 1.5 - 3.0 | 107 | 19 | 5/64 | 2.1 | 2 | 50 |
| MR2 | 1/8 - 3/16 | 3.0 - 5.0 | 170 | 30 | 9/64 | 3.6 | 3 | 75 |
| MR3 | 3/16 - 15/64 | 5.0 - 6.0 | 215 | 38 | 13/64 | 5.1 | 4 | 100 |
Packaging
- Each box contains 4 complete splices
with connecting pins and retaining washers.
Lengths for standard belt width: 12" (300 mm), 18" (450 mm), 24" (600 mm), 36" (900 mm) , 42" (1050 mm), 48" (1200 mm). Other lengths on request
Connecting Pins
Flexible stainless steel Polymer-covered cable. Available in coils, by
the meter.
Installation Tool:
MR-FIX
This compact and lightweight application tool, made of steel and
aluminum, allows the splicing of all three sizes of fsteners. The tool
holds the belt and fasteners while the staples are driven through the
belt with a punch and hammer.
MR - FIX
Standard Length:
100 mm; other lengths (multiples of 100)
on request.
Open ended, this hammer tool allows continuous lacing of wider belts.