Fasteners For Heavy Duty Conveyor Belts
Fasteners made of stainless steel or in
high tensile steel (H.T.S.)
Pre-closed for easy installation.
Smooth loop design to extend connecting pin life.
Staples pre-mounted in staggered formation to increase joint strength,
especially on worn belting, made of stainless steel.
| Staple Size | Belt Thickness Range | Maximum Belt Tension | Pin Diameter |
Minimum Pulley Diameter |
||||
| INCH | mm | PIW | KN./m | INCH | mm | INCH | mm | |
| 20 | 3/16 - 19/64 | 5 - 7.5 | 800 | 140 | 15/64 | 6 | 10 | 250 |
| 22 | 19/64 - 3/8 | 7.5 - 9.5 | 15/64 | 6 | ||||
| 24 | 3/8 - 1/2 | 9.5 - 12.5 | 9/32 | 7 | ||||
| 26 | 1/2 - 9/16 | 12.5 - 14 | 9/32 | 7 | ||||
Packaging
- Box of 10 strips of 8" (200mm). Sufficient to lace 42" (1050mm) of belting)
Connecting Pins
15/64" (6 mm) diameter armored stainless steel cable.
9/32 (7 mm) diameter armored stainless steel cable.
Installation
Hammer Tool: T10H/G20002 - FIX (patented)
Easy transportable, simple to operate and maintenance free, the
T10H/G20002 FIX Hammer Tool is able to install TITAN 10H
fasteners and GORO G20002 fasteners in a single operation,
with a punch and a hammer. Open ended, it allows a continuous lacing for
wider belts.
Standard Lengths:
42" (1050mm), 48" (1200mm)
54" (1350mm), 60" (1500mm)
Other lengths on request.